Additional Connections
The following connections do not fall under the heading of either ECM connections, ALDL connections, Fuse connections, or Ground connections. If you are working with an existing factory harness, you should find these connections are already in place and this information can be used to double check the connections.
MAF Sensor terminal E is connected to MAF Sensor Power Relay terminal A (Design 1) or E (Design 2)
MAF Sensor Terminal D is connected to MAF Sensor Power Relay Terminal D (Design 1) or C (Design 2) and MAF Sensor Burn-Off Relay Terminal A (Design 1) or E (Design 2 )
Hot Rod Handbooks Voice: 0412 883 235 Email: choco@hotrodhandbooks.com.au |